HOW TO FIX RICOH PRINTER ERROR
Steps to Fix the Error Message
If your Ricoh printer is showing printer error message then you need to be careful and sort the same by following the below steps.Step 1- Check your power cord- The power cord is responsible for providing power to your printer. Therefore to ensure that it is properly connected to your printer you need to see if it is plugged to both wall outlet and printer securely. Once you are sure that the connection is proper you should switch on your printer and start with the printing job.
Step 2- Check for Online Indicator- If you are unable to detect the online indicator then you should click on press key for activating the same. If this is one reason because of which printer is not working then with this step the printer would start printing.
Step 3- Solve the error with the printer- If you are unable to print through your printer and you see a red alert indicator then you must know that there is an error with the printer. If the red light stays then you should read the error message on the dashboard and take appropriate action.
Step 4- Check paper tray- Sometimes the printer is unable to print because of lack of paper in the paper tray. You should, therefore, double check the paper tray for ensuring the existence of paper. If you find the tray empty then you must load paper into it.
Step 5- Try and print a configuration page- If you are unable to print with your printer you must try and print a configuration page. In case the page is unprintable, then you must be assured that there is a malfunction with your printer. You must, therefore, contact an expert for servicing your printer.
Step 6- Look for Interface Cable- You should check and see that your interface cable is securely connected with your printer and computer. You must also be sure of the correct interface cable type that is neither damaged nor worn. Also, the port connection settings must be checked.
Step 7- Check Lit “Data In” Indicator- As you have sent data to your printer you must check and see that the Data In indicator is blinking. If it is not lit or blinking then you must check your network connection and interface cable as non-blinking indicates that the data is not being sent to the printer.
Step 8- Examine the strength of Wireless LAN signal- You should check for the strength of the signal. If the signal is not good then you must try moving to the location where the signal is proper.
Step 9- Check Bluetooth- If you are employing Bluetooth then you must check its signal strength. You must check for installation, obstruction and according to demand you need to change the location of both computer and printer for assisting in the printout.
If above steps on How To Fix Ricoh Printer Error Message don’t work, you should call a customer representative. You can also call on the customer care number for assistance.
Comments
Post a Comment