How to Fix Brother Printer Error A5
A Complete Guide on How to Fix Brother Printer Error A5
Do you own a brother printer which
is displaying an error with code a5? Generally, Brother Printers display a5
error only under three conditions-: if there is a foreign stuck in the printer,
if an external substance gets stuck in the drum unit, thereby hampering its
functionality and lastly, it may also occur due to the slow wearing out of the
drum present inside the printer.
There are mainly two ways explaining
how to fix brother printer error a5 and these can be executed through
the following ways:
Method 1: Inspect and Clean
This method involves a simple
examination of the cartridges and drum unit of the printer and looking for any
dirt that needs cleaning in order to fix the issue.
- Before initiating the process, check that the printer
is not turned on.
- After that, move over to the drum unit and look at the
toner cartridges by opening the front cover and pressing the cover and
releasing it.
- There you will be able to find a green handle which you
need to pull upwards.
- Now you have to take out the drum unit for inspection.
Make sure you do it with proper care.
- After this, you will have to eject the cartridges by
holding the handles safely.
- Here you must find a grey lever which will help in
lifting the drum as you need to take it out for inspection of any foreign
particle like dirt, paper clips or bits etc. and clean it properly if you
find anything.
- Also, examine the printer’s internal spaces and try to
remove all the foreign elements present for mitigating the issue of code
a5.
- Now you must carefully insert the drum unit just as it
was installed before in your printer by first tilting it and then,
arranging it from the bottom area to the top so that it fits into the
machine.
- Later, you must take the grey latch down and again put
the toner cartridges as they were arranged before.
- It should work fine now without showing any error.
Method 2: Replace the drum unit with a new one
If the first method does not resolve
this issue, there are only two scenarios left out of which one is most likely
the issue. The first is that the drum unit is old and worn out and the second
is that some physical harm has taken place in the drum unit.
- Buy a new drum unit for your Brother printer and use it
to replace the old drum unit. This will surely aid in troubleshooting the
issue present and lead to the proper functioning of the printer.
Comments
Post a Comment